Table of Contents
Advertisement
To set up Calling Card Calling,
Press
1
Select 2 Calling Cards. Enter Security Code.
2
To add a Calling Card, press Setup softkey.
3
The screen will prompt you for a name. Enter name. If desired,
4
press Alpha softkey until Quick appears for T9
and enter name.
In the next screen, select the sequence of numbers (for exam-
5
ple, access+number+ card) used by your Calling Card service
and press OK softkey.
Enter numbers in sequence and press OK softkey.
6
✱
You can also edit and delete Calling Card data in the Calling Card Setup
screen. Default setting = Clear.
When enabled, Auto Answer will automatically answer incoming calls
after 5 seconds.
Press
1
Select 3 Auto Answer.
2
Select Enable or Disable and press OK softkey.
3
When enabled, Auto Redial will automatically redial a call. There will be
a delay and a tone will be heard before Auto Redial.
Press
1
Select 4 Auto Redial.
2
Select Enable or Disable and press OK softkey.
3
When enabled, Any Key Answer allows you to answer a call by pressing
any key except Mute softkey, End/Back key, and Mode key.
Press
1
Select 5 Any Key Answer.
2
Select Enable or Disable and press OK softkey.
3
and select 4 Preferences, 2 Call Setup.
See Calling Card Calling, page 28.
and select 4 Preferences, 2 Call Setup.
and select 4 Preferences, 2 Call Setup.
and select 4 Preferences, 2 Call Setup.
®
Quick Type
Default setting = Disable
Default setting = Enable
Default setting = Enable
45
Advertisement
Table of Contents
