Table of Contents
Advertisement
Voice Mail
When you have new voice mail, a tone alerts you. The screen displays
and indicates the number of new messages waiting in your voice mailbox.
To access your Voice Mailbox,
Press and hold
1
1 Voice Mail. If you are using more than one mailbox, a list
will display.
2
Press
number displayed in the menu.
3
Press either Call left softkey or
mailbox.
Setting up a Voice Mailbox
You can have up to three voice mailboxes, including the AT&T PCS voice
mail service, which is set up as the first entry.
To add a Voice Mailbox,
Press
1
then press Add right softkey.
Enter your 8-digit Security Code. Default code is 00000000.
2
Enter the Access Number, PIN number and name for the
3
mailbox and press OK left softkey.
4
Press either Call left softkey or
Edit Voice Mailbox
To edit the name, number, or PIN, or delete an existing Voice Mailbox,
Press
1
Select the mailbox you wish to change and press Edit
2
softkey.
Enter your 8-digit Security Code. Default code is 00000000.
3
Select Edit Name, Edit Number, Edit PIN, or Delete, then
4
press OK softkey.
To enter text, press right softkey to select input mode. The
5
most recently used mode is displayed over the right softkey.
To change mode, cycle through the right softkey until
desired text entry mode is displayed. When finished, press
OK softkey.
✱
or press
or
to select a mailbox, or press the corresponding
and select 2 Messages, 1 Voice Mail, 2 Setup,
and select 2 Messages, 1 Voice Mail, 2 Setup.
See Entering Text, page 34.
and select 2 Messages,
to access the selected
to access the new mailbox.
13
Advertisement
Table of Contents
