Download Print this page

Advertisement

The
trusted
dependable
most
,
name

projector lamp

in
sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.

Advertisement

   Also See for Mitsubishi Electric HC3

   Related Manuals for Mitsubishi Electric HC3

   Summary of Contents for Mitsubishi Electric HC3

  • Page 1: Projector Lamp

    trusted dependable most name projector lamp sales. http://www.myprojectorlamps.com http://www.myprojectorlamps.ca http://www.myprojectorlamps.eu The following projector manual has not been modified or altered in any way.

  • Page 2

    LCD PROJECTOR MODEL User Manual H C 3 EN – 1...

  • Page 3

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...

  • Page 4: Table Of Contents

    Troubleshooting ....................26 Indicators ......................29 Specifications ..................... 30 Declaration of Conformity Model Number : Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules.

  • Page 5: Important Safeguards

    Important safeguards Please read all these instructions regarding your 10. Power sources LCD projector and retain them for future reference. This projector should be operated only from the Follow all warnings and instructions marked on the type of power source indicated on the marking LCD projector.

  • Page 6

    plate may cause injury or damage to other equip- WARNING: ment. Also, do not put the projector on a desk that is Unplug immediately if there is something easily affected by heat. wrong with your projector. Clean the air-filter once a month. Do not operate if smoke, strange noise or odor comes Clean the air-filter frequently.

  • Page 7: Overview

    Overview 1 Remote control sensor (Front) 2 Control panel 3 Speaker 4 Terminal panel 5 Air outlet grille 6 Kensington Security Lock Standard connector 7 Foot adjustment button 8 Lens 9 Air outlet grille 10 Remote control sensor (Rear) 1 1 Air inlet grille Control panel 1 Focus ring 2 Zoom ring...

  • Page 8

    Bottom side 1 Lamp cover 2 Air inlet grille / Filter cover 3 Adjustment foot (Left/Right) Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. Remote control 1 Transmission window 2 Indicator 3 POWER button...

  • Page 9: Remote Control

    Remote control Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). •...

  • Page 10: Installation

    Installation Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection : Between the screen and the front edge of the projector Screen Distance from the screen : L Diagonal size Width : W Height : H Maximum...

  • Page 11: Basic Connections

    Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. •...

  • Page 12

    Projector + DVD player or HDTV decoder Some DVD players have an output connector for 3-line fitting (Y, C ). When connecting such DVD player with this projector, use the COMPUTER/COMPONENT VIDEO IN terminal. DVD player or HDTV decoder AUDIO cable AUDIO IN to audio output Video cable...

  • Page 13

    Basic connections (Continued) Projector + Computer RGB cable for PC Computer COMPUTER IN to monitor port AUDIO IN to PC audio AUDIO OUT MONITOR OUTPUT PC audio cable (option) output Important: • When you use a longer RGB cable instead of the provided cable, the image quality may deteriorate. •...

  • Page 14: Preparation

    Preparation Preparation for projection Important: • Install the screen on a flat wall at 90 degrees to the 1. Attach the provided power cord to the projector. floor. 2. Plug the power cord in the wall outlet. • Slanting the projector more than ±10˚ (horizontally) or 3.

  • Page 15: Basic Operation

    Basic operation POWER STATUS 3, 1, 2 AUTO POSITION COMPUTER KEYSTONE VIDEO ENTER MENU 3, 1, 2 COMPUTER VIDEO AUTO POSITION VOLUME REAL MUTE KEYSTONE ENTER 16:9/4:3 MENU MEMORY SELECT VIDEO Important: Power-on • The projector starts warming up when the 1.

  • Page 16

    Power-off Volume from the speaker Use the following procedure to turn off the projector. Press the VOLUME + or – button to change the Do not turn off the projector by unplugging the power volume from the speaker. cord while the lamp is on. Unplugging while the lamp The volume control bar will appear on the screen.

  • Page 17: Menu Operation

    Menu operation IMAGE CONTRAST ± 30 ± 30 BRIGHTNESS ± 30 YELLOW ± 30 sRGB ON , OFF GREEN ± 30 COLOR MATRIX VIDEO CYAN ± 30 COMPUTER BLUE ± 30 USER MAGENTA ± 30 RGB-TINT ± 20 COLOR TEMP. STANDARD CONTRAST R ±...

  • Page 18

    1 IMAGE CONTRAST ..Use to adjust the image contrast. The contrast becomes higher opt. XGA60 as the value increases. BRIGHTNESS ..Use to adjust the image brightness. The image becomes IMAGE brighter as the value increases. CONTRAST sRGB ....Choose ON for projection emphasizing on the color BRIGHTNESS reproducibility.

  • Page 19

    Menu operation (continued) 3 FEATURE opt. XGA60 MENU POSITION ... Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). FEATURE AUDIO MODE ..Select COMPUTER to output the audio that is input to the MENU POSITION AUDIO IN terminal when COMPUTER is chosen as the COMPUTER...

  • Page 20: Image Adjustment

    Image adjustment 4. Press the { or } button to select the desired Image adjustment color. You can adjust the image using the IMAGE menu. • If you want to adjust the all color balance of the image, select RGB-TINT. opt.

  • Page 21

    Image adjustment (continued) When noise appears on the top or bottom part Adjustment of the image from the of the image : computer Adjust SHUTTER (U) or SHUTTER (L) in the This projector adjusts the format of the video signal SIGNAL - USER menu.

  • Page 22: Advanced Features

    Advanced features 12. Adjust the size of the image to be captured so that Setting of the image displayed during such image stays within the red frame. startup or muting • Press the {, }, $, or % button to move the You can display your desired image as the startup red frame.

  • Page 23: Password Function

    Advanced features (continued) 4. Press the ENTER button. Password function • The screen for entering the password will This projector is equipped with the password func- appear. tion that is designed for prevention of theft and wrong operation by children and restriction on PASSWORD operation by other than specified users.

  • Page 24

    control whose command you want to install until the Installation other device’s remote MEMORY button start blinking. commands • When the MEMORY button blinks six times and You can install other device’s remote commands in the then goes out, the function has been installed remote control of this projector.

  • Page 25: Lamp Replacement / Maintenance

    Lamp replacement / Maintenance 8. Tighten up the screws (c) using a The lamp is designed to project the image on the LCD Phillips screwdriver (+). panels. When the lamp no longer functions, replace it with a new one. 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the Caution: lamp cover.

  • Page 26

    The projector automatically shuts off when the 4. Attach the air-filter. lamp operation time exceeds the time elapsed 5. Attach the filter cover to the projector. until the lamp shutdown . It can’t start • Make sure that the air-filter is attached cor- operating again until the lamp is replaced and rectly without displacement.

  • Page 27: Troubleshooting

    Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren't projected on the screen. Problem Cause and solution Power isn't turned on. • Check the states of the indicators. POWER STATUS Solution...

  • Page 28

    Images aren't projected correctly. Problem Cause and solution Projected images are • Check that the cable connected to the external device isn't intermittent. shaking. • Connect the cable's plug with the external device's connector firmly. Projected images are • Press the AUTO POSITION button. displaced.

  • Page 29

    Troubleshooting (continued) Others Cause and solution Problem • This air comes out as a result of cooling the inside of the projector. This isn't a product Hot air is emitted from malfunction. the air outlet grilles. No audio is output. •...

  • Page 30: Indicators

    Indicators This projector has two indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your dealer. POWER indicator STATUS indicator POWER STATUS AUTO POSITION COMPUTER...

  • Page 31: Specifications

    Specifications Type LCD projector Model Rated power supply 100 - 240 V AC, 50 / 60 Hz Rated input 2.6 A LCD panels 0.7-inch LCD panel: 3 pieces (for R, G, B) Pixels 960 x 540 = 518,400 pixels Total 1,555,200 pixels Active pixel rate: 99.99% or more (each panel) Colors 16,770,000 colors...

  • Page 32: Replacement Part

    Connectors COMPUTER / COMPONENT VIDEO IN RS-232C (8P) (Mini D-SUB 15P) Pin No. Spec. R(RED)/C G(GREEN)/Y B(BLUE)/C Pin No. Name – – – – – – CTS / 5V IN/OUT DCD / CLOCK DDC Data HD/CS RI / DATA DDC Clock Dimensional drawings (unit : mm) What’s included in the box 1 S-video cable...

  • Page 33

    Specifications (continued) Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V)*1 (H x V) TV60, 480i(525i) – 15.73 59.94 960 x 540 –...

  • Page 35

    MENZ (BDT Ltd) :+44 (1506) 431927 (Warranty Registration) http://www.bdt.co.nz/projectors/warranty.asp E-mail :projector.info@meuk.mee.com 1 Parliament St, Lower Hutt, Wellington, New Zealand Russia (Mitsubishi Electric Europe B.V Moscow Representative Office) Sales Phone :+64-(0)4-560-9100 52, bldg.5, Kosmodamianskaya Nab, 113054, Moscow, Russian Federation :+64-(0)4-560-9133 Sales...

Comments to this Manuals

Symbols: 0
Latest comments: