Mitsubishi Electric XD8100U User Manual page 37

Menu operation (continued)
FEATURE menu
FEATURE
ITEM
ASPECT
PROJECTOR ID
GROUP ID
PASSWORD FUNCTION DISPLAY INPUT
MENU POSITION
CINEMA MODE
LANGUAGE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
opt.
1 1 2 2
ASPECT
NORMAL
PROJECTOR ID ALL
GROUP ID A
PASSWORD FUNCTION
DISPLAY INPUT
MENU POSITION 1.
CINEMA MODE AUTO
LANGUAGE English
ADVANCED MENU
ENTER
RESET ALL OK
SETTING
NORMAL
16:9
FULL
ALL
01 to 63
A to Z
/
/
MENU ACCESS
SPLASH ID SCREEN
1 (upper left) / 2 (lower right) /
3 (center)
AUTO
FILM
VIDEO
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/
Norsk(Bokmål) / Türkçe /
/ Bahasa Indonesia /
Bahasa Melayu /
ENTER
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
AUTO
OFF
3.75% / 7.5%
ON / OFF
1 1 2 2
FEATURE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
LAMP 2 TIME RESET
FILTER TIME RESET
FUNCTION
Select to change the aspect ratio automatically depending on the
input signal. (Select this option for normal use.)
Select to expand squeezed (or horizontally compressed) images
such as DVD images to 16:9. Press the ENTER button to make
further settings such as positioning of the displayed image and
selection of signals expanded by this function. (See page 30.)
Select to project images in full size (1024 x 768 pixels) irrespective
of type of input signal.
Select this option to control the projector regardless of the ID
number. (See page 60.)
Use to set the ID number (two-digit number). (See page 60.)
Use to set the ID number for controlling multiple projectors by
groups for monitoring and control via the SERIAL terminal. (See
page 60.)
Use to enable or cancel the password lock. See page 56 for details.
Use to change the position of the menu.
The fi lm mode will be automatically activated when a fi lm source
signal is input.
Select AUTO for normal use.
When fl icker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
Fixed to the fi lm mode.
The fi lm mode will not be activated.
Use to select the language used in the menus.
The ADVANCED MENU is displayed for the following settings.
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn't displayed correctly, select the desired video format manually.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-
up cancel function for the U.S. Choose OFF when the image is
dark.
Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT VIDEO
IN-1 terminal.)
EN-37
opt.
AUTO
AUTO
OFF
STANDARD
OFF
OK
OK
OK