3D Eyewear - Replacing Battery - Panasonic TX-PR50VT60 User Manual

3D Eyewear - Replacing battery

When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on. In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the
●
waste disposal regulations in your local area.
1. Remove the battery cover using pen tip or screwdriver (minus -) etc.
2. Replace the battery (coin-shaped lithium battery CR2025)
If difficulty, remove it with the tip of the driver.
●
Note the correct polarity (+ or -).
●
3. Attach the battery cover
- 59 -