Setting For Usb Hdd - Panasonic TX-PR50VT60 User Manual

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device will be listed.
Please note that USB HDD will be formatted and all data in it will be
●
erased after this setup.
Before setting, connect the USB HDD and be sure to turn on the USB
●
HDD.
Recording
1. Display the menu with
2. Select Setup USB Device Setup
3. Select the USB HDD for recording with
Some USB HDD may not be displayed.
●
To display information of the highlighted device
●
4. When the caution and confirmation screen for using USB HDD is
displayed, select
5. When the confirmation screen of USB HDD name is displayed, select
with / and press
The name for the USB HDD is created automatically. If you want to edit
●
the name, select Yes.
1) Enter characters with
OK to set
2) Press BACK/RETURN
6. When the confirmation screen to enable USB HDD for recording is
displayed, select
If another formatted USB HDD for recording already exists, this
●
confirmation screen will be displayed to switch to enable this USB HDD
for recording.
Mode of the USB HDD
●
: The USB HDD is available for recording / playing back. Only one
USB HDD on the list is available for recording.
: The USB HDD is available for playing back.
USB HDD setup Preparations
MENU
with
Yes with / and press
OK to set
/ /
to store
Yes with / and press
- 81 -
/ and press OK
/ and press OK
OK to proceed
/ or numeric buttons, and press
OK to set
to access
to start setup
Yes