3D Eyewear - Replacing Battery; Viewing 3D - Panasonic TX-L65WT600E Help Manual

Hide thumbs Also See for TX-L65WT600E:
Table of Contents

Advertisement

3D Eyewear - Replacing battery

When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on. In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
1. Remove the battery cover using pen tip or screwdriver (minus -) etc.
2. Replace the battery (coin-shaped lithium battery CR2025)
If difficulty, remove it with the tip of the driver.
Note the correct polarity (+ or -).
3. Attach the battery cover

Viewing 3D

You can enjoy viewing 3D images with contents or programmes
corresponding to the 3D effect by wearing the 3D Eyewear.
This TV supports Frame Sequential, Side by Side and Top and Bottom 3D
formats.
– Frame Sequential is the 3D format that the images for the left and right
eyes are recorded with the high definition quality and alternately played
back.
3D content of 4K format is not supported.
The 3D Eyewear must be worn to view 3D images. Perform the First
Registration when the 3D Eyewear is used for the first time.
Watching
1. Turn the 3D Eyewear on and put it on
3D
3D Eyewear - Registration
- 58 -

Advertisement

Table of Contents
loading

Table of Contents