2) Set
Satellite
for the selected LNB
– Select
No Satellite
(available satellite will be searched in Auto Setup).
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Satellite
/
access
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
if you do not know the connected satellite
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
Tuning and editing channels
to store
with
/
and press
Search Mode
/
Scan Mode
OK
to store
Start scan
with
- 73 -
PIN
(depending on the Single
Selectable satellites
OK
to access
with
/
and press
/
and press
OK
OK
to start
Auto Setup
manually.
User
OK
to
to search.