Aspect Control Signal - Panasonic TX-PR50VT60 User Manual

Aspect Control Signal

Programmes usually contain an "Aspect Control Signal" (Widescreen signal,
Control signal through SCART / HDMI terminal).
In Auto mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through SCART (pin8) / HDMI
terminal is found. The aspect will switch to the appropriate ratio.
Watching
■
Available conditions
●
Satellite terminal (WSS only)
Valid input signal format:
DVB-S
●
Terrestrial / cable terminal (WSS only)
Valid input signal format:
DVB-C
DVB-T
PAL D, K
SECAM D, K
Invalid input signal format:
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
●
AV1 (SCART) / AV2 (VIDEO) terminals
Valid input signal format:
PAL
SECAM
PAL 525/60
M.NTSC
NTSC
: Control signal through SCART (pin 8) / HDMI terminal only
For best picture Aspect
- 41 -