Menu Options - Mitsubishi Electric XD520U User Manual

Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
opt.
IMAGE
2. Press the or button to select INSTALLATION.
opt.
INSTALLATION
3. Press the ENTER button (or
opt.
INSTALLATION
WALL SCREEN

Menu Options

Set the following options provided in the respective menus.
1. IMAGE menu
Menu option
AUTO
PRESENTATION
COLOR ENHANCER
STANDARD
THEATER
USER
±30
CONTRAST
±30
BRIGHTNESS
COLOR TEMP. 4 options
±10
COLOR
±10
TINT
±5
SHARPNESS
ADVANCED MENU
NOISE REDUCTION ON/OFF
CTI ON/OFF
±5
INPUT LEVEL
button).
BEIGE
Setting
Automatically sets an optimal color balance based on the input signal.
Use this setting for most cases.
Makes projected images bright and crisp.
Makes projected images look natural.
Makes projected images soft and smooth. Best suited for movies.
Adjusts the gamma curve, color intensity, or balance. (See page 21.)
Adjusts the contrast of projected images. (See page 21.)
Adjusts the brightness of projected images. (See page 21.)
Adjusts the color temperature. You cannot select this setting when
WALL SCREEN in the INSTALLATION menu is set to a setting other
than OFF. (See page 21.)
Adjusts the color tone of projected images. (See page 21.) You cannot
select this setting when the COMPUTER1, COMPUTER2, or DVI is
selected as the input source.
Adjusts the color tint of projected images. (See page 21.) You can
select this setting only when NSTC is selected as the input signal.
Adjusts the sharpness of projected images. (See page 21.)
Reduces noise of projected images when the input signal is noisy.
Corrects smeared color borders.
Adjusts the input level of analog video signals.
The input level of the video signal varies across devices to which the
projector is connected. A high input level causes projected images to
appear solid white, and a low input level causes projected images to
appear dark.
4. Press the or button to select AUTO POWER OFF.
AUTO POWER
ON
AUTO POWER
OFF
5. Press the or button to adjust the auto power off time.
AUTO POWER
ON
AUTO POWER
OFF
6. Exit the menu by pressing the MENU button several times.
Important:
• When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
• After selecting the items marked with
ton.
Feature description
OFF
OFF
OFF
30min
, press the ENTER but-
opt.
IMAGE
COLOR
AUTO
ENHANCER
CONTRAST 0
BRIGHTNESS 0
COLOR TEMP. STANDARD
COLOR 0
TINT 0
SHARPNESS 0
ADVANCED MENU OK
opt.
IMAGE
ADVANCED MENU
NOISE REDUCTION ON
CTI
ON
INPUT LEVEL 0
IMAGE ADVANCED menu
EN-17