Table of Contents
Advertisement
6- If you wish to send copies of your message to other contacts, click on the arrow
on the right of the screen to display the Cc: and Cci: fields.
PLEASE NOTE: In this case, the message will be forwarded in successive transmis-
sions (as many transmissions as there are contacts).
7- Click on the text area, then enter the text of your message.
PLEASE NOTE: The maximum length of a message text is 160 characters. If you enter
a longer text, it will be separated into as many messages as necessary, which will
then be transmitted in succession.
- To send your message:
When you have finished composing your message, click on Send in the top left corner
of the screen.
PLEASE NOTE:
• If the Telephone application is closed or if you have not received a signal from the
network, your message is stored in the Outbox folder.
• If the Telephone application is open and if you are situated in an area which is covered
by the network, your message is sent immediately. An information window opens to
indicate the progress of the transmission.
• If several contacts have been selected and/or if the message text contains more
than 160 characters, your message will be forwarded in a series of successive
transmissions.
• In order to avoid overloading the network, try to limit the number of contacts and
the size of your messages.
- To save your message without sending it:
When you have finished composing your message, click on ok in the top right corner of
the screen.
Your message is then saved in the Inbox folder.
If you wish, you can view the message, amend it and send it at a later time or date.
• Selecting contacts from the address book
When you are ready to send a message, you can select the mobile telephone number of
the contact from your address book, instead of entering it manually in the To: field.
1- Click on New in the bottom left corner of the screen to open the page for composing
a new message.
2- Click on
at the base of the screen.
The list of contacts stored in your address book which have entries in the E-mail field are
displayed on the screen.
3- Use the checkboxes to select the number of the contact.
If you wish to send your message to several contacts, check as many boxes as necessary.
4- Click on ok.
The display now reverts to the page for composing your message. The telephone number of
the recipient of your message is displayed in the To: field.
• Replying to a received message
There are ways of replying to a message.
- From the list of received messages:
1- Click and hold on the header of the message to which you wish to reply.
2- Click on Reply to send your reply only to the originator of the received message or
on Reply to All to send your reply to the originator of the received message and to
all the contacts listed under Copy to: (if any are listed).
39
Advertisement
Table of Contents
