Table of Contents
Advertisement
fig.3
fig.5
fig.4
fig.6
fig.7
• Insertion of the backup battery
IMPORTANT: This operation must only be carried out after the insertion of the battery
(see above).
1- With the point of the stylus, lift up the cover of the backup battery housing (fig.1).
2- Insert the backup battery in its housing (fig.2).
PLEASE NOTE: The positive pole (+) of the battery must be turned towards the
front face of the Mondo.
3- Close the cover and return the stylus to its housing.
fig.2
fig.1
13
Advertisement
Table of Contents
