Table of Contents
Advertisement
• Replacing the backup battery
IMPORTANT : To carry out this operation, it is essential for the main battery of your Mondo
to be in position and sufficiently charged.
When the backup battery is used up, a message will appear on the screen inviting you
to replace it. When this occurs:
1- Close all the applications in use.
2- Remove the stylus from its housing (fig.1).
3- With the point of the stylus, lift up the cover of the backup battery housing (fig.2).
4- Remove the used battery from its housing.
5- Insert the new battery in its housing (fig.3).
PLEASE NOTE: The positive pole (+) of the battery must be turned towards the front
face of the Mondo.
6- Close the cover of the backup battery housing and return the stylus to its housing.
fig.1
fig.3
22
fig.2
Advertisement
Table of Contents
