Table of Contents
Advertisement
Ø The name of the incoming mail server.
Ø The name of the outgoing mail server.
Ø Your e-mail user name and password.
When you have these details, you can start to set the parameters for the Mondo GSM
connection, following the instructions given below.
Ø Stage 1: Setting the ISP telephone number parameters.
1- Click on ÿ Start to access the main menu.
2- Click on Parameters.
3- Click on the Connections tab at the bottom of the screen.
4- Click on Modem.
5- Click on Mondo GSM.
6- Click on Next.
7- Type in the your ISP's Telephone number (NB: use the international format "+..."
to avoid any connection problems when you call from abroad).
8- Click on Next.
9- Click on End.
The basic connection parameters have now been defined.
We strongly recommend that you do not change the other parameters.
Ø Stage 2: Selecting the Dial from location.
1- Click on ÿ Start to access the main menu.
2- Click on Parameters.
3- Click on the Connections tab at the bottom of the screen.
4- Click on Modem.
5- Click on the Dial tab at the bottom of the screen.
6- Select Mondo in the Dial from field.
PLEASE NOTE: The Mondo location must be selected when setting the parameters
for any connection using the built-in GSM telephone as a modem.
7- Click on ok.
Ø Stage 3: Recording the user name and password.
1- Click on ÿ Start to access the main menu.
2- Click on Programs.
3- Click on Connections.
4- Click on Mondo GSM.
5- Type in your User name.
6- Type in your Password.
WARNING: Leave the Domain field blank.
7- Check the Save password box if you wish (if you do not check this box you will
be asked for the password each time you connect).
PLEASE NOTE: If you want to save your user name and password, you must
confirm this by clicking on Connect to connect and then disconnect by clicking
on Cancel.
Ø Stage 4: Selecting the Mondo GSM connection as default connection for
Microsoft Internet Explorer.
1- Click on ÿ Start to access the main menu.
31
Advertisement
Table of Contents
