Table of Contents
Advertisement
- States of the charge indicator of the Mondo (reminder):
Ø Flashing orange: Charging is in progress.
Ø Continuous orange: Charging is finished.
Safety instructions:
• Do not leave your Mondo connected to the AC adaptor any longer than necessary.
• Unplug the AC adaptor from the mains when you are no longer using it.
• Do not expose the battery to extremes of temperature and humidity.
• Avoid putting the battery into contact with metal objects (such as keys, paper clips,
coins, chains, etc.). These might cause short circuits across the battery terminals.
• Avoid dropping the battery or subjecting it to violent physical shocks.
• Do not try to open or disassemble the battery itself.
• Only use the recommended AC adaptors (MA0506 or MA0567).
• If the battery terminals are stained, clean them with a soft cloth.
PLEASE NOTE: It is normal for the battery to heat up during charging.
• Alignment of the touch screen
After the initial charging of the battery is finished. The battery indicator light will be
on (continuous orange).
1- Press the button
screen.
2 - Tap with your stylus on any area of the screen.
If you are using your Mondo for the first time, a message will appear asking you to carry
out the alignment of the touch screen.
3- Tap in the centre of the crosses which appear in turn, firstly in the middle of the
screen, then in each corner of the display zone.
• Use of the stylus
When you have finished the screen alignment procedure, your Mondo offers to teach
you how to use the stylus.
Take the time to read the information displayed, then click on the Next key at the
bottom of the screen.
Follow the instructions which are displayed on the screen to carry out a short exercise.
In the event, it involves learning how to move text in a diary.
1- Tap and hold your stylus on the zone indicated by the arrow to select the text to be
moved and display the menu of possible operations.
2- Lift up your stylus, then tap on Cut in the menu displayed.
The text is placed in memory and is temporarily deleted from the screen.
3- Tap and hold your stylus on the zone indicated by the arrow to select the position to
which you wish to transfer the text and display the menu of possible operations.
4- Lift up your stylus, then tap on Paste in the menu displayed.
The text is displayed in the required position.
5- Tap on the Next key at the bottom of the screen.
situated in the lower part of your Mondo, to activate the
15
Advertisement
Table of Contents
