Initial Charging Of The Battery - Mitsubishi TRIUM MONDO Directions For Use Manual

• Initial charging of the battery

PLEASE NOTE: The instructions below only apply to the first time the battery is charged.
To find out how to proceed for later recharges, see the corresponding section of this
manual, on page 19.
The initial charging of the battery may be carried out by means of the AC adaptor on its
own, or with the desk top support (supplied).
We recommend that you wait for the battery to be fully charged (3 to 4 hours) before
using your Mondo for the first time.
- To charge the battery of your Mondo using the AC adaptor on its own:
1- Insert the plug (a) of the AC adaptor into the power supply socket (b) of the
Mondo (fig.1).
2- Connect the AC adaptor to a mains socket and switch on.
The luminous battery charge indicator will flash orange.
3- When the indicator becomes continuous orange, the battery is charged.
Do not forget to switch off the mains and unplug the AC adaptor from the mains.
- To charge the battery of your Mondo using the desk top support:
1- Insert the plug (a) of the AC adaptor into the power supply socket (b) of the
desk top support (fig.2).
2- Insert your Mondo into the desk top support (fig.3).
PLEASE NOTE: The desk top support supplied is fitted with a serial cable and plug
which you may connect to your computer to exchange data (for more details, see
page 43). For the moment, there is no need to make this connection.
fig.2
3- Connect the AC adaptor to a mains socket and switch on.
The luminous battery charge indicator will flash orange.
4- When the indicator becomes continuous orange, the battery is charged.
Do not forget to switch off the mains and unplug the AC adaptor from the mains.
14
fig.1
b
a
fig.3