Table of Contents
Advertisement
FC225E-PFQX2478ZA-en.book Page 19 Wednesday, May 24, 2006 1:53 PM
Initial Programming
2.6 Date and time
The date and time can be set using either the cordless
handset or the base unit.
L The other party's fax machine will print the date and
time on the top of each page you send according to
your unit's date and time setting.
2.6.1 With the cordless handset
{j/OK}
{^}{V}{<}{>}
1
{j/OK}
2
Press {^} or {V} to select "Handset Setup". i
{>}
3
Press {^} or {V} to select "Time Settings". i
{>} i Press {^} or {V} to select "Set Date &
Time". i {>}
4
Enter the current date/month/year/hour/minute by
selecting 2 digits for each.
Example: 10 August, 2006 10:15 PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{6} {1}{0} {1}{5}.
2. Press {*} repeatedly to select "PM".
5
{j/OK}
6
Press {ih} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
{ih}
Date :10-08-06
Time :10:15
=12/24
;
2.6.2 With the base unit
Important:
L If e is displayed on the base unit, either the date
and time has not been set or the setting has been
lost (due to a power failure, etc.). Set the date and
time by pressing {SET}, then follow step 2 and 3.
{SET}
{MENU}
{<}{>}
1
{MENU} i {#}{0}{1} i {SET}
2
Enter the current date/month/year/hour/minute by
selecting 2 digits for each.
Example: 10 August, 2006 10:15 PM (12 hour
clock format)
1. Press {1}{0} {0}{8} {0}{6} {1}{0} {1}{5}.
2. Press {*} repeatedly to select "PM".
3
{SET}
4
Press {MENU} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
L If the time has not previously been set, Caller ID will
not adjust the clock.
2. Preparation
D:|
0 1/M:01/Y:06
TIME: 00:00
D:|
1 0/M:08/Y:06
TIME: 10:15
19
Advertisement
Table of Contents
