Cordless Handset - Panasonic KX-FC225E Operating Instructions Manual

FC225E-PFQX2478ZA-en.book Page 48 Wednesday, May 24, 2006 1:53 PM
7. Programmable Features
Feature
Setting recall/flash time
(for the base unit and

cordless handset)

Changing the receiving
mode in the manual
answer setting
Setting the connecting
tone
Changing the receiving
mode in the AUTO
ANSWER setting
Changing the TEL/FAX
delayed ring count
48
Feature code Selection
The recall/flash time depends on your telephone exchange or
{#}{7}{2}
host PBX.
{1} "900msec."
{2} "700msec."
{3} "600msec."
{4} "400msec."
{5} "300msec."
{6} "250msec."
{7} "200msec."
{8} "160msec."
{9} "110msec."
{*} "100msec." (default)
{0} "90msec."
{#} "80msec."
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
{1} "TEL" (default): Telephone mode (page 32)
{#}{7}{3}
{2} "TEL/FAX": Telephone/Fax mode (page 33)
If you often have trouble when sending faxes, this feature allows
{#}{7}{6}
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party's machine.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party's machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
{1} "TAM/FAX" (default): Telephone Answering Machine/Fax
{#}{7}{7}
mode (page 34)
{2} "FAX ONLY": Fax only mode (page 34)
If you use an extension telephone when this unit is in TEL/FAX
{#}{7}{8}
mode, select the desired number of times the extension
telephone rings before the unit answers the call.
{1} "1"
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
See page 33 for details.