Hotel Mode Menu List - Panasonic TH-42PRT12U Operating Instructions Manual

42" high definition hospitality plasma display
Hide thumbs Also See for TH-42PRT12U:
Table of Contents

Advertisement

Hotel Mode Menu List

Item
Off
Adjusts the input signal when the unit is turned on.
Initial Input
Off: The input signal when the power was last turned off is set.
Note:
This menu is available only when "Input Lock" is "Off".
Off: Onscreen information is not displayed.
On: Onscreen information is displayed.
Onscreen Display
On 1: Onscreen information is displayed, except some RS-232C communication information is not
Used to set the volume level at power-on.
Off: The volume is set to the same level as when the power was last turned off.
Initial VOL Level
0 to 6: The volume is set to the selected level.
Note:
It is not possible to select an Initial VOL Level setting which is higher than the Maximum VOL Level setting.
Used to set the volume level so that it will not exced the maximum setting.
Off: No restrictions are placed on the volume level.
Maximum VOL Level
0 to 6: The volume is restricted to the selected level.
Note:
It is not possible to select a Maximum VOL Level setting which is lower than the Initial VOL Level setting.
Off
Locks the input switch operation.
Input Lock
Off: Input switch can be used.
Used to restrict the operation of the buttons on the main unit.
Off: All the buttons on main unit can be used.
Button Lock
Menu: Locks the Menu button on the main unit.
On: Locks all the buttons on the main unit except the Power button.
Off
Off:
User1: You can only use
User2: You can only use
Remocon User Level
User: Locks all the buttons on remote control.
Note:
Hotel Mode menu may not be accessed when you select "User2" or "User3". When this happens, press
and hold the VOL - key on the display, then press the OK button on the remote control. The message "Are
you sure to out the mode?" will appear, select Yes.
YPbPr
AV1
AV2
displayed.
YPbPr
AV1
AV2
User1
User2
You can use all of the buttons on the remote control.
INPUT
,
POWER
button on the remote control.
POWER
Details
HDMI1
HDMI2
HDMI
HDMI1
HDMI2
HDMI
User
MUTE
,
,
,
buttons on the remote control.
VOL
HOTEL MODE Setup
PC
PC
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents