Aspect Controls - Panasonic TH-42PRT12U Operating Instructions Manual

ASPECT Controls

The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
POWER
MENU
RETURN
RECALL ASPECT OFF TIMER
CH
TNQ4CM051
Aspect mode
Picture
16:9
JUST
DISPLAY
4:3
INPUT
MUTE
ASPEC T
VOL
Enlarged screen
Press repeatedly to change the aspect.
For "AV" signal input:
16:9 JUST
For "YPbPr", "HDMI" and "PC" signal input:
The aspect ratio is fixed at 16:9.
The display of the pictures fills the screen.
In the case of SD signals, pictures with a 4:3 aspect ratio are
enlarged horizontally, and displayed. This mode is suited to displaying
anamorphic pictures with a 16:9 aspect ratio.
Pictures with a 4:3 aspect ratio are enlarged horizontally so that the
picture distortion is minimized. The display of the areas around the left
and right edges of the screen is slightly elongated.
Pictures with a 4:3 aspect ratio are enlarged horizontally so that the
picture distortion is minimized. The left and right edges of the pictures
are cut off. The display of the areas around the left and right edges of
the screen is slightly elongated.
Pictures with a 4:3 aspect ratio are displayed with their original aspect
ratio. Side panels are displayed at the left and right edges of the
screen.
Pictures with a 4:3 aspect ratio are displayed with their original aspect
ratio. The left and right edges of the pictures are masked by side
panels.
4:3
Description
21