Remote Control Transmitter - Panasonic TH-42PRT12U Operating Instructions Manual

Basic Controls

Remote Control Transmitter

POWER button
The Plasma Display must first be
plugged into the wall outlet.
Press this button to turn the Plasma
Display on, from standby mode. Press
it again to turn the Plasma Display Off
to standby mode.
MENU button
Displays the menu screen.
(see page 22)
OK button
Press to make selections.
POSITION buttons
RECALL button
Press to display the current input signal
mode.
ASPECT button
Press to adjust the aspect.
This button can be used only in AV
input signal. (see page 21)
Channel buttons
Press the buttons to adjust the channel.
These buttons are also used for to
adjusting digital channel when a tuner
pack is installed. For more information,
please refer to the tuner pack's
manual.
20
INPUT
POWER
MENU MUTE
RETURN
RECALL ASPECT OFF TIMER
CH VOL
TNQ4CM051
DISPLAY
INPUT button (see page 18)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
RETURN button
Press the RETURN button to return
to previous menu screen.
OFF TIMER button
The Plasma Display can be preset
to switch to standby mode after a
fixed period.
Each time the button is pressed, the
timer is changed with an interval of
10 minutes.
10 20 30 40
OFF 120
When the timer is set, the TV will
display a notification countdown 3
minutes before it switches to standby
mode.
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
50
60