Switch Between Displaying And Hiding The Location Name Information; Register Additional Landmarks - Panasonic Lumix DMC-FT3 Operating Instructions Manual

Switch between displaying and hiding the location name information

Switches the displaying and hiding of the location name information displayed on the
screen.
Select [Area Info. Set] from the [GPS/Sensor] menu.
Press 3/4 to select the item to change, and then press [MENU/SET].
Select [ON] for the items to display and [OFF] for the items not to
display by pressing
Additionally register new landmarks in the database of this unit. It can be displayed on the
screen or stored as a positioning result once registered.
Select [My Landmark] from the [GPS/Sensor] menu.
Press 3/4 to select [None], and then press [MENU/SET].
•
Confirmation screen is displayed. Positioning is started when [Yes] is selected.
•
Current location information is displayed once the positioning is successful.
After confirming the GPS information, press [MENU/SET].
Enter landmark name.
•
For details on how to enter characters, refer to
∫ Change or delete registered landmark names
1 Select registered landmark name in above step
2 Press 2/1 to select [Edit] or [Delete], and then press [MENU/SET].
•
Text input screen is displayed when [Edit] is selected. Enter the landmark name again.
•
The registered landmark is deleted when [Delete] is selected.
Note
•
Up to 50 landmarks can be additionally registered.
Recording
3 4
, and then press [MENU/SET].

Register additional landmarks

- 88 -
(P44)
(P44)
" "
Entering Text on P115.
2
, and then press [MENU/SET].