[Rec Quality] - Panasonic Lumix DMC-FT3 Operating Instructions Manual

For details on [Motion Picture] Mode menu settings, refer to P44.
This sets up the picture quality of motion pictures.
Applicable modes:
When [AVCHD] is selected
Item
[GFS]
1920k1080 pixels/Approx. 17 Mbps
[FSH]
[GS]
1280k720 pixels/Approx. 17 Mbps
[SH]
•
What is bit rate
This is the volume of data for a definite period of time, and the quality becomes higher when the
number gets bigger. This unit is using the "VBR" recording method. "VBR" is an abbreviation of
"Variable Bit Rate", and the bit rate (volume of data for definite period of time) is changed
automatically depending on the subject to record. Therefore, the recording time is shortened
when a subject with fast movement is recorded.
•
[GFS]/[FSH] can record motion pictures with even higher definition and picture quality than
[GS], [SH].
•
GPS information can be stored when you record with [AVCHD] set to [GFS] or [GS].
When [Motion JPEG] is selected
Item
[HD]
[VGA]
[QVGA]
•
It cannot be recorded to built-in memory except for the [QVGA].
Note
•
Motion pictures recorded in [AVCHD] or [Motion JPEG] may be played back with poor
picture or sound quality or playback may not be possible even when played back with
equipment compatible with these formats. Also, the recording information may not be
displayed properly. In this case, use this unit.
For details on AVCHD compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
•
To play back AVCHD motion pictures recorded with this unit on Panasonic Blu-ray Disc Players
(DMP-BD30/DMP-BD31/DMP-BD50) it is necessary to update the firmware of the Blu-ray Disc
Player.
You can download the latest firmware version from the following website.
http://panasonic.net/support/

[Rec Quality]

ñ·
Quality (bit rate)
Picture size
1280k720 pixels
640k480 pixels
320k240 pixels
Recording
¿
(CCD output is 25 fps)
(CCD output is 25 fps)
- 112 -
fps Aspect ratio
50i
16:9
50p
fps Aspect ratio
16:9
30
4:3