Panasonic Lumix DMC-FT3 Operating Instructions Manual page 50

v [No.Reset]
•
The folder number is updated and the file number starts from 0001.
•
A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P53) after saving the data on a PC or elsewhere.
•
To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
w [Reset]
•
When the [Reset] setting is selected during recording, the operation that resets the lens is also
performed at the same time. You will hear the sound of the lens operating but this is normal and
not indicative of malfunctioning.
•
When the [Rec] Mode settings are reset, data registered with [Face Recog.] will be also reset.
•
When [Setup] menu settings are reset, the following settings are also reset.
–
The birthday and name settings for [Baby1]/[Baby2] and [Pet] in Scene Mode
–
[GPS/Sensor] menu
–
The settings of [Travel Date] (departure date, return date, location)
–
The [World Time] setting
•
The folder number and the clock setting are not changed.
x [USB Mode]
Reset the file number of the next recording to 0001.
The [Rec] or [Setup] menu settings are reset to the initial settings.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
- 50 -
Basic