Panasonic Lumix DMC-FT3 Operating Instructions Manual page 85

∫ About the GPS information display screen
•
An icon displaying the positioning status is displayed in the
recording screen when the GPS is started up.
A Location name information
Icon displaying the
positioning status
[ ]
[ ]
[ ]
[ ]
[ ]
•
Location name information is displayed on the screen once the positioning is successful.
Displayed location name information is stored in this unit.
•
Current location information stored in the unit is deleted in the following cases:
–
When [GPS Setting] is set to [OFF]
–
When the power is turned off with [GPS Setting] set to [
–
When the setup is reset by [Reset]
∫ About the GPS information stored in the recorded pictures
Once the positioning is successful, the following informations are stored in the recorded
pictures and motion pictures recorded in [Motion JPEG] or [AVCHD] set to [GFS], [GS].
–
latitude/Longitude
–
Location name information (country/region, prefecture/state, city/ward/county, town/village,
landmark)
Valid information for the current position is displayed as location name information by
searching the location names and landmarks in the database in this unit based on the
longitude/latitude from the positioning. (It may not display the closest location.)
•
[---] is displayed when there is no valid information even when the positioning is successful.
•
Even when the location name information is displayed as [---], it may be possible to select the
location name information with [GPS Area Select] (P87).
•
Desired landmark may not be registered. Location name information is as of
For details of the types of landmark, refer to
•
Location name information (location names or landmark names) may be different from the
official names.
Recording
Elapsed time after successful positioning
Within the last 5 minutes
Between 5 minutes and 1 hour ago
Between 1 hour and 2 hours ago
More than 2 hours ago
When positioning was not possible
"
Landmark types
- 85 -
A
]
December 2010
"
on P170.
.