Panasonic Lumix DMC-FT3 Operating Instructions Manual page 25

Note
•
Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(optional) when the access indication is lit (when pictures are being written, read or
deleted, or the built-in memory or the card is being formatted). Furthermore, do not
subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation
again.
•
Write-Protect switch
no further data writing, deletion or formatting is possible. The ability to write, delete
and format data is restored when the switch is returned to its original position.)
•
The data on the built-in memory or the card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of the camera or the card.
We recommend storing important data on a PC etc.
•
Do not format the card on your PC or other equipment. Format it on the camera
only to ensure proper operation.
•
Keep the Memory Card out of reach of children to prevent swallowing.
provided (When this switch is set to the [LOCK] position,
A
(P53)
Preparation
- 25 -
2