Registering Your Current Location As A Landmark; Changing The Display Of Location Name Information; Using Gps To Set The Clock - Panasonic Lumix DMC-TZ20 Operating Instructions Manual

Recording the place of recording with GPS
(Continued)
Recording Mode:

Registering your current location as a landmark

You can register a personal location that has not been registered in the camera as a
landmark. The registered landmark can be displayed or recorded on the pictures. (Up to
50 landmarks)
First, move to the location that is to be registered, and operate the GPS where positioning
can be executed.
Select [My Landmark] from the [GPS] menu
Use cursor button to select [None] and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
Positioning starts.
Press [MENU/SET]
• When positioning has failed
→ Move to a location where positioning can be executed, then select [Yes] using
cursor button and press [MENU/SET].
Input the landmark name
■
Editing or deleting registered landmarks
Select the landmark which was registered in step
Select an item and press [MENU/SET].
[Edit] This corrects the landmark name.
[Delete] This deletes the registered landmark.
80
VQT3H08
(Character input method →84)
above, and press [MENU/SET].
For [GPS] menu setting procedures (→38)

Changing the display of location name information

The screen display of location name information found by positioning can be changed.
Select [Area Info. Set] from the [GPS] menu
Use cursor button to select the item for changing display and
press [MENU/SET]
Use cursor button to turn items to be displayed [ON] and
items not to be displayed [OFF], and then press [MENU/SET]

Using GPS to set the clock

Using the date and time information in the GPS signal, the camera can automatically
update its [Clock Set]. Also, after moving from your home area to one in a different time
zone, the time is changed to the local time automatically when positioning is successful.
Select [Auto Clock Set] from the [Setup] menu
Use cursor button to select [ON] and press [MENU/SET]
Perform the operations from step
(first time only)
(→19)
●
When [Auto Clock Set] is turned to [ON], [World Time] is set to [Destination].
●
Time and date corrected by [Auto Clock Set] is not as accurate as radio clocks. If the
time and date are not properly corrected, reset with [Clock Set].
in "Setting the clock"
81
VQT3H08