Panasonic Lumix DMC-FT3 Operating Instructions Manual page 104

∫ About [š] (Face Detection)
The following AF area frames are displayed when the camera detects
the faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green
when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
•
Under certain picture-taking conditions, including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF Mode] is switched to [
([Ø] while motion pictures are taken).
–
When the face is not facing the camera
–
When the face is at an angle
–
When the face is extremely bright or dark
–
When there is little contrast on the faces
–
When the facial features are hidden behind sunglasses, etc.
–
When the face appears small on the screen
–
When there is rapid movement
–
When the subject is other than a human being
–
When the camera is shaking
–
When Digital Zoom is used
–
Taking pictures underwater
∫ Setting up [ ] (AF Tracking)
Bring the subject to the AF tracking frame, and press 4.
A AF tracking frame
•
AF area will be displayed in yellow when a subject is recognised, and
focus will automatically adjust continuously following the subject's
movement (Dynamic tracking).
•
AF tracking is turned off when 4 is pressed again.
Note
•
Dynamic tracking function may fail to lock, lose the subject in AF
tracking, or track different subject depending on the recording
conditions such as the ones below.
–
When the subject is too small
–
When the recording location is too dark or bright
–
When the subject is moving too fast
–
When the background has the same or similar colour to the subject
–
When jitter is occurring
–
When using the zoom
–
Taking picture underwater
•
If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
•
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF Mode] in that case.
•
It cannot be set to [
–
In [Panorama Assist], [Starry Sky], [Fireworks], [Pin Hole], [Film Grain] and [High Dynamic] in
Scene Mode
–
In [B/W], [SEPIA], [COOL], or [WARM] in [Color Mode]
Recording
] in the following conditions.
- 104 -
]
A