Basic Controls - Panasonic TH-42PWD3 Operating Instructions Manual

Basic Controls

Main Power On/Off Switch
The Power Indicator will light.
•
Power-OFF .... Indicator not illuminated (The unit
will still consume some power as long as the
power cord is still inserted into the wall outlet.)
•
Stand-by .... Red
•
Power-ON ..... Green
Stand-by (ON/OFF) button
The Wide Plasma Display must first be plugged into
the wall outlet and turn on at the power switch (see
page 18).
Push this button to turn the Wide Plasma Display ON,
from STANDBY mode. Push it again to turn the Wide
Plasma Display OFF to STANDBY mode.
Status button
Push the "Status" button to display
the current system status.
VIDEO
N O R M A L
OFF TIMER 90
1 VIDEO(S-VIDEO)/COMPONENT,
RGB/PC mode
2 Aspect mode (see page 22)
3 Off timer
The off timer indicator is displayed
only when the off timer has been set.
(see page 25, 26, 28, 29)
PICTURE button
(see page 28)
PICTURE POS./SIZE button
(see page 24)
Push the "PC" mode selection
button to select the PC mode.
This button is used to switch
directly to PC mode.
R - STANDBY
G POWER ON
TH-42PW3
(VIDEO (S-VIDEO)/COMPONENT,
Power Indicator
RGB/PC Mode Selection)
Push the "INPUT" button to select
VIDEO(S-VIDEO)/COMPONENT or
RGB/PC input signal modes sequentially.
1
2
3
N
N button
PICTURE
PICTURE
POS. /SIZE
PC button
The Wide Plasma Display may be preset to switch to stand-by after a fixed period.
The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
INPUT
Input button
SURROUND button
(see page 27)
INPUT
SURROUND
VOL
R
SOUND SET UP
ASPECT
PC OFF TIMER
OFF TIMER button
60 90
0
— +
VOL
Volume Adjustment
Push the Volume Up "+" or
Down "–" button to
increase or decrease the
sound volume level.
Input button
(VIDEO(S-VIDEO)/COMPONENT,
RGB/PC Mode Selection)
Press to select VIDEO(S-VIDEO)/
COMPONENT or RGB/PC input signal
modes sequentially. (see page 19)
Sound mute On/Off (see page 26)
Volume Adjustment
Press the Volume Up "+" or Down
"–" button to increase or decrease
the sound volume level.
R button (see page 21, 24, 26, 30)
ACTION button
Press to make selections
POSITION buttons
SET UP button (see page 30)
SOUND button (see page 26)
ASPECT button
Press to adjust the aspect.
(see page 22)
11