Model No. Model No. TH-50PHD3V TH-50PH30V TH-50PHD5V TH-42PWD4V TH-42PWD5V Plasma Display Installation Instructions Before attempting to install this model, please read these instructions completely. Operation method of plasma display, please see the Operation Manual for the TH-50PHD3, TH-50PHD30,TH-50PHD5, TH-42PWD4, TH-42PWD5. TQZH330-1...
Thank you very much for purchasing the Plasma Display. Installation work should only be carried out by a qualified technician. • If the unit is installed incorrectly, the display may fall down and personal injury may result. Precautions with regard to setting up WARNING Always have a service technician perform the installation.
Page 3
Components Points to note during installation This model is for the Plasma Display. Do not use this model for any other purpose. In order to ensure correct, problem-free operation of the Plasma Display, do not install the Display in any of the following places. •...
Installation procedure 1. Check the strength of the installation location. The wall-hanging bracket weights Units : mm Dimensions of the wall-hanging bracket ): inch (sold separately) approx. 6 kg (13.2 lbs.), a 50-inch 490 (19 display weights approx. 45 kg (99.2 lbs.), 450 (17 a 42-inch display weights approx.
Page 5
3. Attach the insulation spacers to the display. Remove the four bolts from the display. Remove M8 bolts In the holes that previously held the 4 M8 bolts, insert the insulating spacer, toothed pan washer, and pan head bolt with hex socket (4 each) that came with the wall-hanging bracket.