Audio Input Select; Touch Panel Settings (Settings When Using Touch Panel) - Panasonic TH-50PH30E Operating Instructions Manual

Options Adjustments

Audio input select

Set up the sound when an image input is selected.
Options
Audio input select
Touch Panel settings
Press ACTION ( ) button
Audio input select
♪ VIDEO
VIDEO
♪ COMPONENT
COMPONENT
HDMI ♪ HDMI
DVI ♪ DVI
PC ♪ PC
Image input Audio input
[VIDEO] VIDEO / COMPONENT / DVI / PC / NO AUDIO
[COMPONENT]* VIDEO / COMPONENT / DVI / PC / NO AUDIO
[HDMI] VIDEO / COMPONENT / HDMI / DVI / PC / NO AUDIO
[DVI] VIDEO / COMPONENT / DVI / PC / NO AUDIO
[PC] VIDEO / COMPONENT / DVI / PC / NO AUDIO
* "COMPONENT"may be displayed as "RGB" depending on the setting of
"Component/RGB-in select". (see page 36)
Note:
HDMI Audio is selectable only for HDMI Input.

Touch Panel settings (Settings when using Touch Panel)

The mode to restrict NANODRIFT Saver (see page 29) operation when using Touch Panel (available as an option) is set up.
Options
Audio input select
Touch Panel settings
Press ACTION ( ) button
Touch Panel settings
Touch Panel mode
On
Calibration mode
Calibration mode
This setting is used in calibrating a touch panel.
You can confi gure the setting if "Touch Panel mode" is "On".
Touch Panel settings
Touch Panel mode On
Calibration mode
Calibration mode
44
1/3
NO AUDIO: No audio input (Mute)
1/3
Set "Touch Panel mode" to "On".
select
1
adjust
2
Select "Calibration mode" and then press
select
1
set
2
The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.
After 180 seconds or when you have the menu displayed with a remote control, Calibration
mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction
manual.
Press to select image input.
Press to select audio input.
NANODRIFT Saver in Touch Panel mode: On
The value set for NANODRIFT turns into "On" and
displayed in gray.
The moving distance of NANODRIFT is limited to 3 × 3 dots
to prevent pointer drift on a touch panel.
When the menu is not displayed (normal screen)
Hold down for over 3 seconds.
When Image input and Audio input
differ from each other, the Audio input
is displayed as below.
PC
COMPONENT
.
16:9