Sync; Hdmi Range; Input Signal Display - Panasonic TH-50PH30E Operating Instructions Manual

Setup for Input Signals

Sync

This function operates only during input from PC IN terminal.
Select Signal from the "Setup" menu during RGB or Component input signal.
Setting RGB sync signal
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Setting Component sync signal
Confi rm that the input is set to Component input (this setting is valid only for Component input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y.

HDMI Range

Switches the dynamic range according to the input signal from HDMI terminal.
Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between "Video(16-235)" and "Full(0-255)" according to
the input signal.
Note:
This function can be set only for HDMI terminal input.

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for Component / RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during DVI signal input.
40
Press to select the "Sync".
Press to adjust.
Press to select the "HDMI Range".
Press to select "Video(16-235)", "Full(0-255)", "Auto".
Signal
Sync Auto
Cinema reality Off
XGA Mode Auto
HDMI Range Auto
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
Signal Format 1280×1024/60
H-Freq. 63.98 kHz
V-Freq. 60.02 Hz
Dot Clock Freq. 108.0 MHz
Signal Format 1280×1024/60
[ RGB ]