Panasonic TH-50PH30E Operating Instructions Manual page 43

Item
Off: Nullify all the settings adjusted.
Studio W/B On: Sets the colour temperature for TV studio.
Note: Valid only when the "Warm" is set as "White balance" in Picture menu.
Sharpens the contrast for a better view when a part of the image is too light to see.
Off: Disables "Studio Gain".
Studio Gain On: Enables "Studio Gain".
Note: This setting is valid only when the input signals are as follows:
Off
You can set the power-on delay time of the displays to reduce the power load, when you press
turn on the multiple displays that are set together, for example, on MULTI DISPLAY system.
Set each display's setting individually.
Off:
Power On Screen
1 to 30 (sec.): Set the power-on delay time (second).
Delay
Notes:
• During this function is working, the power indicator is blinking green.
• This function also works when the power recovers from failure or after plugging off and in again the
power cord.
Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of
Off: Default aspect mode
On: All Aspect mode
All Aspect
Aspect mode of each setting is as follows:
(Example: HD signal)
Off 4:3→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just
On 4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2
Sets the operational mode of the automatic position adjustment in the Pos./Size menu.
Manual: Automatic position adjustment starts when
Auto Setup
Auto:
Off: Does not rotate the image.
Rotate
On: Rotates the image 180 degrees.
Whether to show/hide No activity power off Precautions at the time of power ON is set.
Power On Message
On: The warning precautions are shown at the time of power ON.
(No activity power
Off: The warning precautions are not shown at the time of power ON.
off)
Note: This setting is enabled only if "No activity power off" is "Enable".
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or
"Remote ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
The "Shipping" menu is displayed and the lock is released when it disappears.
Component Video, RGB (analog), HDMI
1 2 3.... 30
The display will be turned on at the same time as
After pressing , the display will be powered on with time delay depending on this setting.
button, the aspect changes in the selected mode.
position adjustment is executed from the Pos./Size menu.
Other than remote control or menu operation, automatic position adjustment starts:
When the display power is turned ON.
When the input signal is switched.
button on the remote control and hold for more than 5 seconds.
Options Adjustments
Adjustments
is pressed.
is pressed on the remote control or automatic
to
43