Connecting the control terminals for relay play
Use the control terminals of the two units to connect for relay play. (
Rear panel
Direct drive digital turntable 2
Connecting with the stereo amplifier (Not using the DJ mixer)
Do not connect with the PHONO terminal. Connecting will result in excessive sound being generated and may result in serious damage
to your equipment.
Connect with the amplifier's CD or AUX input terminal.
Rear panel
Connecting to equipment with digital input terminals
Connect to the digital input terminal on the DJ mixer or amplifier with digital input terminals using the connection cables (not included).
•SD Audio cannot be output from this unit's digital out terminals.
Rear panel
page 23)
Control cable (not included)
Type: 3.5 mm stereo
Stereo phono cable (Supplied accessories)
Connection cable (not included)
Type: RCA coaxial
Rear panel
Direct drive digital turntable 1
Speaker
(not included)
Amplifier
(not included)
DJ mixer etc. (not included)
9
RQT7115