Putting the player together
Connecting to the PHONO terminals and AC IN terminal
Make connection to the PHONO terminals and AC IN terminal before setting up or installing
the player.
Attention
Be careful not to tip over the player.
1
Take out the player from the package, and rest the player in the assembled
cardboard box so that you can make connection to the PHONO terminals
and AC IN terminal on the back side.
① T ake out the pad in the
bottom.
③ Put the pad into
cardboard box.
Point the vertex of ▷ at the
short side of the cardboard box.
2
Connect the supplied PHONO cable, PHONO earth lead, and AC mains lead.
(Red)
12
② Fold the pad along the creases on the back side.
④ Fold the front flap inside.
(White)
(Black)
Connecting the PHONO earth lead to
the player and amplifier.
T urn the terminal to the left
to loosen.
Insert the earth lug and
tighten the terminal
securely.
⑤ Rest the player in the box.
Proceed to
2
.
To avoid damaging the player,
cover the player contact area
with a soft cloth or a protection
sheet wrapping the player.
Insert the AC mains lead
up to a point just before
the round hole.
Pad