Connections; Connecting With The Dj Mixer - Technics SL-DZ1200 Operating Instructions Manual

Connections

Connecting with the DJ mixer

This example indicates a connection with the SH-MZ1200 DJ mixer (not included) and two digital turntables. Use the stereo phono cable (supplied
accessories) and control cable (not included) to connect the main unit with the DJ mixer. Turn off all power when connecting component equipment.
Connect the AC mains lead after all other connections have been connected.
Stereo phono cable
White (L)
Red (R)
Rear panel
Type: 6.3 mm
stereo
Headphone
(not included)
DJ mixer rear panel
For the United Kingdom:
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Connecting with other mixers
Do not connect with the PHONO terminal. Connecting will result in excessive sound being generated and may result in serious damage
to your equipment.
Connect the main unit's LINE OUT terminal with the mixers LINE input terminal or AUX input terminal.
Listening with the headphones
•When connecting the headphones, reduce the volume using the phones VOLUME control.
•Avoid listening for prolonged periods of time to prevent hearing damage.
8
RQT7115
Direct drive digital turntable 2
Connects to DJ mixer CH4.
Household
mains socket
Connection to the SL-DZ1200 rear panel CONTROL terminal
Only the direct drive digital turntable or the separately sold
DJ Mixer can be operated.
Connecting to control terminals of other manufacturer's products
may result in incorrect operation or other equipment problems.
Rear panel
AC mains lead
Type: 6.3 mm
(supplied
stereo
accessories)
Headphone
(not included)
Control cable
(not included)
Type:
3.5 mm stereo
When connecting for
fader start play
( page 23)
Direct drive digital turntable 1
Connects to DJ mixer CH1.
Household
mains socket
Control cable
(not included)
Type:
3.5 mm stereo
AC mains lead
(supplied
accessories)