Panasonic WV-CW860 Operating Instructions Manual page 36

• The CAMERA ID moves faster when the joystick is kept at the
right or left for one second or more.
• Move the cursor to RET to return to the SET UP menu, and
press the CAM (SET) key.
Light Control Setting (ALC/MANUAL)
1. Display SET UP MENU on the monitor screen by referring to page
16.
2. Move the cursor to ALC/MANUAL and select ALC or MANUAL by
using the joystick.
The factory default setting is ALC.
When you select ALC, set backlight compensation.
Note: The backlight compensation submenu associated with this
menu is described separately and should be set up after
installing the camera at the site and observing the actual site
picture.
3. When MANUAL is selected, quit the setup menu by pressing the
MON (ESC) key. Press the OPEN or CLOSE key on the controller
for iris adjustment.
(1) ALC Mode with BLC ON
1. Press the CAM (SET) key after selecting ALC. The ALC CONT
menu appears.
2. Move the cursor to the BLC and select ON.
3. If you want to adjust the video output level, move the "I" cursor for
LEVEL. Adjust it to the desired level by using the joystick.
4. Move the cursor to RET and press the CAM (SET) key to return to
the CAM SET UP menu. To return to the camera picture, press the
F4 button.
37
CAMERA ID.––
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
–––– POSI RET RESET
CAM1............
CAMERA ID.––
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
–––– POSI RET RESET
CAM1............
Camera setting menu
** SET UP **
CAMERA ID OFF
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SENS UP X2 AUTO
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
AF MODE MANUAL S
RET SPECIAL2
Backlight compensation menu
** ALC CONT **
BACK LIGHT COMP
BLC OFF
MASK SET
LEVEL ••••|••••
- +
RET
** ALC CONT **
BACK LIGHT COMP
BLC ON
LEVEL ••••|••••
- +
RET