Panasonic WV-CS650 Operating Instructions Manual page 25

(2) ALC Mode with SUPER-D OFF
1. Move the cursor to the SUPER-D parameter and select OFF.
(When you select MANUAL, SUPER-D is not available.) The item
MASK SET appears on the menu.
2. Move the cursor to MASK SET and press the CAM (SET)key. The
48 mask areas appear on the monitor screen. The cursor is
blinking in the top left corner of the screen.
3. Move the cursor to the area where backlight is bright and press
the CAM (SET) key to mask that area. The mask turns white.
(When the cursor is moved on an area that has already been
masked, the mask and cursor start blinking.)
4. Repeat steps 1 to 3 to mask the desired area. To cancel masking,
move the cursor to that area and press the F2 button of the WV-
CU550A. (For the WV-RM70, press the Left and Right switches
simultaneously.
5. After masking is completed, press the MON (ESC) key. The 48
mask areas on the monitor screen disappear and the field setup
menu appears.
6. If you want to change the video output level (picture contrast),
move the "I" cursor for LEVEL and adjust the level.
7. Move the cursor to RET and press the CAM (SET) key to return to
the CAM SET UP menu. (To return to the camera picture, press
the F4 button.)
(3) MANUAL Mode
1. Move the cursor to ALC/MANUAL and select MANUAL by using
the joystick.
2. Press the CAM (SET) key so that the manual setting menu
appears.
Control the level by using the joystick.
3. Move the cursor to RET by using the joystick and press the CAM
(SET) key to return to SET UP.
Turns to white
Blinking
- 22 -
Blinking
Blinking
** ALC CONT **
BACK LIGHT COMP
SUPER-D OFF
MASK SET
LEVEL ....I....
-
RET
** ALC CONT **
BACK LIGHT COMP
SUPER-D OFF
MASK SET
LEVEL ....I....
-
RET
Manual setting menu
** MANUAL CONT **
IRIS ....I....
CLOSE OPEN
RET
+
+