Table of Contents
Advertisement
(1) Chroma Level Setting (CHROMA GAIN)
• Move the cursor to the "CHROMA GAIN" mode position. The cursor
"I" starts blinking.
• While observing the vectorscope or colour video monitor, adjust the
chroma level by using the Joystick. The cursor "l" moves left or right.
(2) Aperture Level Setting (AP GAIN)
• Move the cursor to the "AP GAIN" mode position. The cursor "l" starts
blinking.
• While observing the colour video monitor, adjust the aperture level by
controlling the Joystick.
(sharp).
(3) Pedestal Level Setting (PEDESTAL)
• Move the cursor to the "PEDESTAL" mode position. The cursor "l"
starts blinking.
• While observing the waveform monitor/oscilloscope or colour video
monitor, adjust the pedestal level (black level) by moving the
Joystick. The cursor "l" moves left (low, dark) or right (high, bright).
(4) Camera Resetting
Move the cursor to the "CAMERA RESET" position by using the
Joystick and press the F3 Button.
This camera is reset to the factory preset condition.
(In case of WV-RM70, keep pressing the Right, Left and Set Switches
simultaneously more than 2 sec.)
(5) To close the SPECIAL menu
Move the cursor to the "RET" position by using the Joystick and press
the Joystick.
The setup menu is displayed.
Notes:
How to reset to factory setup
Any of the above settings plus the ALC/ELC level control and phase
adjustments, can be reset to the factory setup by placing the cursor over
the desired mode and then simultaneously pressing both the Joystick for
more than 2 seconds.
The cursor "l" moves left (soft) or right
- 19 -
Special menu
* SPECIAL *
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
* SPECIAL *
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
* SPECIAL *
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
* SPECIAL *
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
* SPECIAL *
CHROMA GAIN
....I....
AP GAIN
....I....
PEDESTAL
.I.......
CAMERA RESET
PUSH SW
RET
+
+
+
+
+
Hide quick links:
Advertisement
Table of Contents
