Battery Replacement; Turning The Power On/Off; Setting The Time And Date - Panasonic KX-TCD430E Operating Instructions Manual

Preparation

Battery replacement

If 074 flashes even when the handset
batteries have been fully charged, both
batteries must be replaced.
Important:
L Please use only the Panasonic batteries,
noted on page 3.
L Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L Do not mix old and new batteries.
L Use only 2 nickel metal hydride (Ni-MH)
batteries or 2 nickel cadmium (Ni-Cd)
batteries. Do not mix battery types.
L Ensure that the correct battery type is
selected (page 19).
1
Press the notch on the cover firmly and
slide it in the direction of the arrow.
2
Remove the batteries positive (+)
terminal first. Replace both batteries. See
the battery installation on page 6.

Turning the power on/off

Power on
Press {ih} for about 1 second.
L The display will change to the standby
mode.
Power off
Press {ih} for about 2 seconds.
L The display will go blank.
8
Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333

Setting the time and date

Important:
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {*}.
4
Enter the current hour and minute by
selecting 2 digits for each (24-hour time
entry).
Example: 15:15
Press {1}{5} {1}{5}.
L If you make a mistake, press {C}.
Digits will be cleared from the right.
5
Press {>}.
L "SETTING BS" will be displayed.
6
Press {>}, then press {*} 2 times.
7
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
L If you make a mistake, press {C}.
Digits will be cleared from the right.
8
Press {>}.
L "SETTING BS" will be displayed.
9
Press {ih}.
Note:
L If a power failure occurs, set the time and
date again.