Panasonic KX-TCD430E Operating Instructions Manual page 21

2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {3}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
5
Press {2}.
6
Select the desired setting by pressing {1}
for time break recall or {2} for earth
recall.
L If you select time break recall, "1-2"
will be displayed and it shows 80 ms.
7
Press {>}, then press {ih}.
Setting pause length
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {3}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
5
Press {3}.
6
Select the desired setting by pressing {1}
for 3 seconds or {2} for 5 seconds.
7
Press {>}, then press {ih}.
Setting call restriction
You can restrict selected handsets from
dialling certain phone numbers. You can
assign up to 10 phone numbers (memory
locations 1–10) to be restricted per handset.
If a restricted number is dialled, the call will
not be connected and the restricted number
will flash on the display. For example,
storing an area code will prevent a handset
from dialling a long distance call.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {6}.
Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333
Useful Telephone Settings
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
L All the registered handset numbers will
be displayed.
L Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
5
Press the desired handset numbers.
L The selected handset numbers will
flash.
L To cancel a selected handset number,
press the number again. The number
will stop flashing.
6
Press {>}.
7
Enter the phone number to be restricted
(8 digits max.).
L If you enter a number when a
previously stored number is already
displayed, the new number will erase
the old number.
L To select a different memory location,
press {>} repeatedly and enter a
number.
8
Press {>}.
9
Press {ih}.
Turning on/off call restriction
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING BS", then press {>}.
3
Press {6}.
4
Enter "0000" (default base unit PIN).
L If you changed PIN, enter it (page 20).
L Handset numbers will be displayed.
Flashing numbers indicate call
restriction is on; non-flashing numbers
indicate call restriction is off.
5
Press the desired handset numbers to
turn on/off.
6
Press {>}, then press {ih}.
21