ADVANCED CONTROL OPERATION
Displaying the Setup Menu
1. Press the power switch once (switch remains down (;)) to turn on the power of the monitor.
2. Power Indicator is on.
3. Select the input channel by pressing the input signal select switch.
Press the MENU button to open the setup menu.
It will close automatically if no operation takes place within about 10 seconds.
BRIGHT
CONTRAST
PICTURE
COLOUR
AFC
LANGUAGE
Adjustment
4. Move the cursor to LANGUAGE by pressing the (D) or (C) button.
5. Select the desired LANGUAGE parameter by pressing the (–) or (+) button. Pressing the button will toggle the language of
the setup menu as shown below.
6. Move the cursor to BRIGHT, CONTRAST, PICTURE, COLOR, TINT or AFC by pressing the (D) or (C) button, then adjust
the level of the selected item by pressing the (–) or (+) button.
While the level of an item is being adjusted, the indicator displays the changed level as shown below.
Item
BRIGHT
CONTRAST
PICTURE
COLOR
TINT
AFC
7
0
0
0
0
SHORT
ENGLISH
NORMAL SETTINGS
Effect
Darker Brighter
Less More
Soft Sharp
Less More
Greenish
Reddish
Short Long
Indicator
BRIGHT
20
CONTRAST
20
PICTURE
20
COLOR
20
TINT
20