Wj-Sx150 Setup Menu (Osd); Displaying Setup Menu; Programming Setup Menu; Time & Date - Panasonic WJ-SX150 Operating Instructions Manual

WJ-SX150 SETUP MENU (OSD)

The WJ-SX150 SETUP MENU (SETUP MENU) enables func-
tion controls that are not available by direct operation.
Note: Only one operator can enter SETUP MENU.

Displaying SETUP MENU

To display SETUP MENU, follow the procedure below.
1. Confirm that the camera and peripherals are correctly
and securely connected and that all components are
turned on.
2. To execute the selection, select one of the monitors (1
to 4) by pressing the numeric button, then press the
MON (ESC) button.
The MONITOR indicator will light up.
3. Press the SETUP button while holding down the SHIFT
button on the system controller.
WJ-SX150 SETUP MENU will appear on the active mon-
itor as shown below, and the system controller's SETUP
indicator will light up.
The tree of SETUP MENU is shown in the next page.
SETUP SHIFT
The following functions and buttons are valid in SETUP
MENU:
Joystick to UP(D): Moves the cursor up or returns to
the previous page.
Joystick to DOWN(C): Moves the cursor down or dis-
plays the next page.
Joystick to L(A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
PREV button: Selects the previous mode or parameter.
NEXT button: Selects the next mode or parameter.
Numeric buttons: Enters numerals.
CLEAR button: Deletes a character when editing a
camera title.
CAM (SET) button: Executes the selections and dis-
plays a submenu for items with the (O) mark.
MON (ESC) button: Returns to SETUP MENU or the
previous menu.
44
WJ-SX150 SETUP MENU
100 TIME&DATE Au g /21/2002 10:55 AM
200 D.S.T. ON
O
300 SEQUENCE
O
400 ALARM
O
500 CAMERA TITLE
600 SYSTEM O
O
700 OPERATOR REGISTRATION
This operating instructions uses the symbols to
describe the buttons.
4. To end the setting and return to the normal view, press
the SETUP button while holding down the SHIFT button
when SETUP MENU is displayed.
The system controller's SETUP indicator will go off.

Programming SETUP MENU

As shown in the tree, SETUP MENU has seven main sub-
menus:
TIME & DATE, D. S. T., SEQUENCE SETUP, ALARM
SETUP, CAMERA TITLE, SYSTEM SETUP and OPERATOR
REGISTRATION.
SEQUENCE SETUP, ALARM SETUP, CAMERA TITLE, SYS-
TEM SETUP and OPERATOR REGISTRATION are further
divided into additional submenus.
The (O) mark indicates that the item has a submenu for
more detailed setups.
Refer to the figure in next page for the composition of
SETUP MENU.
1.00
TIME & DATE
WJ-SX150 SETUP MENU
100 TIME&DATE
200 D.S.T.
300 SEQUENCE
O
400 ALARM
500 CAMERA TITLE
O
600 SYSTEM
700 OPERATOR REGISTRATION
How to Display
To display this menu on the monitor, move the cursor to 100
TIME & DATE in SETUP MENU by moving the joystick to D
or C.
Parameters
You can move the cursor to each parameter by moving the
joystick to A or B.
• Month
Press the NEXT or PREV button to select the correct month.
• Day
Press the numeric buttons to enter it directly.
1.00
Au g /21/2002 10:55 AM
ON
O
O
O