4. Input/output signal settings
4-8. Setting the on-screen display (OSD)
The menu screen is superimposed on the preview output or multi view display output for display.
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the OSD sub menu.
<Menu display>
OSD
OSD
5/11
On
Off
3 Turn [F] to set whether to display the OSD using the OSD item.
On: OSD is displayed.
Off: OSD is not displayed.
This function can be assigned to a user button. See 5-3-1.
4 Turn [F3] to set the output destination using the Select item.
PVW: The menu screen is superimposed onto the preview output, and output.
Multi: The menu screen is superimposed onto the multi view display output, and output.
When On is selected as the OSD item setting, the multi view display split frame and tally information are not
displayed on the monitor.
Examples of OSD displays
">" appears to the left of the selected menu.
Select
PVW
Multi
This indicates the wipe pattern for the background
transition.
[BKGD PATT]
[IN/OUT]
>
Input
1/11
Output
2/11
Ref
3/11
OutPhs
4/11
OSD
5/11
This indicates the wipe pattern for the
key transition.
[KEY PATT]
SQ
Signal
FS
Mode
IN1
On
Normal
Signal
Output
OUT2
PVW
Sync
BBSetup
GenLock
BBST
-
UnLock
System
H-Phase
V-Phase
1H
0
OSD
Select
On
PVW
68
AnaGain
-
0