Table of Contents
Advertisement
The correct temperature and humidity
^ Press the constant humidity button to
save the setting.
^ Press the On/Off button to come out
of the setting mode. If you do not do
this the electronics will switch over to
normal operation automatically after a
couple of minutes.
Humidity level
It is very important to store wine in an
atmosphere with a high humidity level
(60-70 %) so that the corks remain
moist on the outside. A refrigerator with
its low humidity level is therefore not the
best place to store wine. At a low
humidity level corks dry out from the
outside, and so do not seal the bottles
tightly. Wine should be stored lying
down to keep the corks moist from the
inside too. Air entering the bottle will
inevitably spoil the wine.
Useful tip:Before serving, stand the
wine upright for at least two hours, or
the entire day if possible, to allow
any sediment to settle at the bottom
of the bottle.
14
Constant humidity (Dynamic cooling)
button m
This setting enables the relative
humidity inside the wine cooler and the
temperature to be distributed evenly
around the interior so you can store all
your wine under the exactly the same
excellent conditions.
Switching on
If you would like to use the wine cooler
to store wine long term, the constant
humidity setting should be activated.
This will create a continuous climate in
the cabinet which imitates that of a wine
cellar.
^ Press the constant humidity button
m. The indicator light will come on.
Even if this setting has not been
activated, the fan in the appliance
will come on automatically when the
cooling system switches on to
ensure your wine is kept in the
optimum climate.
The fan automatically switches off
when the door is open.
Advertisement
Table of Contents
