Functions Cannot Be Used Simultaneously - Panasonic NV-GS35GN Operating Instructions Manual

CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
TURN OFF THE VIDEO LIGHT:
You are attempting to select an item in
[SCENE MODE] when light is on.
CANCEL NIGHT VIEW MODE:
You are attempting to select an item other
than [OFF] in [SCENE MODE] during night
view mode.
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Progressive ≥When recording onto a
≥When digital zoom
≥When the shutter speed is
≥When the gain value is
≥When the colour night
≥When the portrait mode of
≥When the built-in LED
≥Digital zoom ≥When the Card Recording
≥Fade
44
LSQT0893
tape and a card
simultaneously
(30k or higher)
(24k on NV-GS25) is
used
1/750 or faster in Tape
Recording Mode
increased in Tape
Recording Mode
view function is used
the scene mode is used in
Tape Recording Mode
video light lights and the
gain up mode is set to on.
(NV-GS35 only)
mode is used
Others
≥Image stabilizer ≥When the Card Recording
≥Backlight
compensation
≥Soft skin
≥Recording
check
≥Colour Night
View
≥Zoom
microphone
≥Wind noise
reduction
≥Scene mode
≥Change of
white balance
mode is used
≥When the colour night
view function is used
≥When the built-in LED
video light lights and the
gain up mode is set to on.
(NV-GS35 only)
≥When the iris/gain is set
≥When the colour night
view function is used
≥When the built-in LED
video light lights and the
gain up mode is set to on.
(NV-GS35 only)
≥While recording to a tape
≥While recording to a tape
≥When the Card Recording
mode is used
≥When the built-in LED
video light lights and the
gain up mode is set to on.
(NV-GS35 only)
≥An external microphone is
used
≥When setting the [AUTO/
MANUAL/FOCUS] switch
to [AUTO]
≥When the colour night
view function is used
≥When the built-in LED
video light lights
≥When digital zoom
(30k or higher)
(24k on NV-GS25)is
used
≥When the colour night
view function is used
≥When a menu is
displayed
≥When the built-in LED
video light lights and the
gain up mode is set to on.
(NV-GS35 only)