Functions Cannot Be Used Simultaneously - Panasonic NV-GS180EP Operating Instructions Manual

CHANGE MODE TO USE USB:
The USB cable is connected to the movie
camera in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC mode with the USB cable connected to
the movie camera. You are attempting to
record pictures on a tape/card with the USB
cable connected to the movie camera.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux night view mode, when
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
48
VQT0T85
Others
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions
≥Progressive
≥Digital zoom
≥Wide mode
≥Fade
≥Image stabilizer ≥When the Card Recording
≥Backlight
compensation
≥Soft skin
≥Tele-macro
≥Recording
check
≥Colour Night
View
≥Continuous
Photoshot
≥Zoom
microphone
≥Wind noise
reduction
Conditions which disable
the functions
≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When the colour night
view function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥When the wide mode is
used
≥When the Card Recording
mode is used
mode is used
≥When the colour night
view function is used
≥When the iris/gain is set
≥When the colour night
view function is used
≥While recording to a tape
≥While recording to a tape
≥When the Card Recording
mode is used
≥When [PICTURE SIZE] is
set to other than [640]
≥An external microphone is
used