Kenmore 253 Use & Care Manual page 18

Wear gloves to avoid cuts when
replacing light bulbs.
REPLACING THE FREEZER LIGHT BULB
(SOME MODELS)
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken
glass.
3. Unsnap light shield as shown.
4. Unscrew and replace old bulb with an appliance bulb
of the same wattage.
5. Replace light shield.
6. Remember to plug the refrigerator back in.
Freezer Light Cover Removal
•
•
Short
Vacations
•
•
•
Long
•
Vacations
•
•
•
•
Moving
•
•
Care & Cleaning
Vacation and Moving Tips
Leave refrigerator operating during vacations of 3 weeks or less.
Use all perishable items from refrigerator compartment before leaving on
vacation.
Turn automatic ice maker off, even if you will only be gone for a few days.
Remove all food and ice if you will be gone one month or more.
"0"
Turn controls to and disconnect power (unplug refrigerator from electrical
outlet).
Turn off automatic ice maker and turn water supply valve to closed position.
Clean interior thoroughly.
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
Remove all food and ice.
If using handcart, load from side.
Adjust front rollers all the way up to protect them during sliding or moving.
Pad cabinet to avoid scratching surface.
(continued)
Nonremovable Defrost Water Pan
(some models)
Refrigerator Mid-Level Light Cover Removal
18