Auxes - Midas Venice F32 Operator's Manual

Auxes

Item
5
6
Auxes
There are four independent aux outputs on the rear panel.
Four aux XLR outputs on the rear panel
FireWire output is available for the auxes by the overriding dual stereo input channels
25-26 and 27-28. For more information, see "FireWire" on page 58.
Each aux output is controlled by a discrete section on the control surface.
Auxes on the control surface
Item
1
2
3
VeniceF
Operator Manual
Description
MUTE switch and red LED
output signal. The mute LED illuminates to show that the mute is on.
SOLO switch and yellow LED The SOLO switch routes the monitor send
signal to the mono PFL bus and stereo AFL buses. When the SOLO switch is
on, the master meters are automatically used for solo metering. The solo
LED illuminates to show when solo is on.
Description
Control knob Adjusts the aux master level. The output level of the aux is
continuously variable from
MUTE switch and red LED
at every point after the master send level. The LED illuminates to show
when the mute is on.
SOLO switch and yellow LED
signal to the mono PFL bus and stereo AFL buses. The solo LED illuminates
to show when solo is on.
The MUTE switch mutes the monitor send
4 (infinity/off) to +10dB.
The MUTE switch mutes the aux send signal
The SOLO switch routes the aux send
65
1
2
3
4
5