Connecting Up; Audio Connections - Midas Venice F32 Operator's Manual

Connecting up

Connecting up
To ensure the correct and reliable operation of your equipment, only high quality,
balanced, screened, twisted pair audio cable should be used.
XLR connector shells should be of metal construction so that they provide a screen
when connected to the console and, where appropriate, they should have Pin 1
connected to the cable screen.
All Jack connector shells should be connected to the cable screen.

Audio connections

This section gives details of the audio connections of the VeniceF.
Table 1: Connector pinouts
Connector on rear
panel
Male XLR chassis
connector (output)
Female XLR chassis
connector (mic input)
Pair of RCA
connectors (tape
in/out)
1/4" TRS Jack plug
(inserts)
1/4" TRS Jack plug
(input, output)
VeniceF
Operator Manual
Example of plug
3 2
3
Pinouts
1 = ground
2 = hot
3 = cold
1 = ground
2 = hot
3 = cold
1 = ground
2 = signal
1 (tip) = send
2 (ring) = return
3 (sleeve) =
1
ground
1 (tip) = hot
2 (ring) = cold
3 (sleeve) =
1
ground
13
Example of socket
1 2
3
1
2
3
1
2